搜索结果: 1-15 共查到“Polishing”相关记录22条 . 查询时间(0.051 秒)
Low surface energy self‐polishing polymer grafted MWNTs for antibacterial coating and controlled‐release property of Cu2O
antibacterial coatings carbon nanotube controlled-release propert functionalization of polymers
2024/1/11
Marine biofouling had been a headache when engaging in marine activities. The most effective and convenient method for dealing with this problem was to apply antifouling coatings. But now a single ant...
Feature-scale Simulations of Particulate Slurry Flows in Chemical Mechanical Polishing by Smoothed Particle Hydrodynamics
Chemical mechanical polishing smoothed particle hydrodynamics particulate flow rough pad wafer defects abrasive concentration
2014/10/10
In this paper, the mechanisms of material removal in chemical mechanical polishing (CMP) processes are investigated in detail by the smoothed particle hydrodynamics (SPH) method. The feature-scale beh...
Chemical Mechanical Polishing of Glass Substrate with α-Alumina-g-Polystyrene Sulfonic Acid Composite Abrasive
chemical mechanical polishing glass substrate α-alumina graft polymerization
2011/8/3
Abrasive is the one of key influencing factors during chemical mechanical polishing(CMP) process. Currently, α-Alumina (α-Al2O3) particle, as a kind of abrasive, has been widely used in CMP slurries, ...
Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials
Color stability Provisional prostheses Food colorants
2010/11/26
The main objective was to investigate the effects of different polishing techniques on the color stability of provisional prosthetic materials upon exposure to different staining agents by mimicking t...
Influence of Polishing of Denture Base Resin and Metal Surfaces on Wettability with Water and Saliva
Denture base materials Surface roughness Contact angle
2009/9/14
The purpose of this study was to investigate the influence of the surface roughness of denture base resin and metal on wettability with water and saliva.
Solid specimens were produced using heat-curi...
Effect of one-step polishing systems on surface roughness of different flowable restorative materials
Polishing Surface roughness Flowable composite
2009/9/14
The purpose of this study was to investigate the influence of one-step polishing systems on the surface roughness of different flowable composites and a microhybrid composite. A total of 120 disks wer...
Morphological analysis of flowable resins after long-term storage or surface polishing with a mini-brush
Flowable resin Surface degradation Morphology analysis
2009/9/11
This study evaluated the surface roughness and morphological changes of various flowable resins after long-term storage in a phosphate-buffered saline (PBS) or surface polishing with a mini-brush. The...
Chemical mechanical polishing of titanium with colloidal silica containing hydrogen peroxide — mirror polishing and surface properties
Chemical mechanical polishing Titanium XPS
2009/9/11
Chemical mechanical polishing (CMP) of cpTi (Ti) was carried out using two types of slurries, acidic and basic colloidal silica containing H2O2 up to 3 wt%, to obtain flat and mirror-polished surfaces...
硅片边缘超声振动辅助化学机械抛光实验（Experiment on Silicon Wafer Edge Hybrid Polishing of Ultrasonic Vibration and Chemical Mechanical）
硅片边缘 超声椭圆振动 复合抛光
2010/2/26
提出一种超声振动辅助化学机械复合抛光硅片边缘新技术，建立了抛光工具设计、性能检测及复合抛光实验系统，并进行了不同超声振动形式传统化学机械以及抛光工具对硅片边缘抛光的实验研究。结果表明，在相同抛光条件下，抛光工具超声椭圆振动对抛光效果的改善作用最佳。抛光工具加入超声椭圆运动后，工件表面粗糙度值Ra由传统抛光法的0.059μm降低到0.043μm，材料去除量增加22%，且抛光表面形貌有明显改善。 A ...
Ceramic Surface Polishing Techniques After Removal of Orthodontic Adhesive
Porcelain Polishing Orthodontic adhesive
2010/3/5
Objective: Verify the in vitro effectiveness of different porcelain surface polishing systems used after orthodontic debonding.
Materials and Methods: Restorations were simulated by 52 metallic sam...
Polishing Compound Residues in Gold Jewellery Alloys
Polishing Compound Residues Gold Jewellery
2009/7/29
Polishing Compound Residues in Gold Jewellery Alloys.
Varietal Difference of Polishing Characteristics and Suitability for Sake Brewing in "Hattan-Type Varieties" of Rice Suitable for Brewing Original Hiroshima Sake
Brewer's rice Hattan-type varieties of rice Polishing Suitability for sake brewing White-core grain
2009/7/24
By successive crossing using Hattan-type varieties originating from "Hattanso" as a parent, "Hattan-type varieties" of rice suitable for brewing the original Hiroshima sake have been bred. The varieti...
Hardness Distribution and Endosperm Structure on Polishing Characteristics of Brewer’s Rice Kernels
Brewer’s rice Endosperm structure Hardness distribution Polishing characteristics SEM
2009/7/23
This study was designed to determine the effects of the hardness distribution and the endosperm structure on the polishing characteristics of brewer’s rice kernels. We used four brewer’s rice cultivar...
Varietal Differences in Endosperm Structure Related to High-degree Polishing Properties of “Hattan Varieties” of Rice Suitable for Brewing Original Hiroshima Sake
Brewers’ rice Endosperm structure Hattan varieties High-degree polishing properties
2009/7/23
This study was conducted to clarify the effect of varietal differences in the endosperm structure on the high-degree polishing properties of Hattan varieties of rice suitable for brewing original Hiro...
Relationship between the Starch Properties of White-Core Tissue and Polishing Characteristics in Brewers’Rice Kernels
Brewers’rice Polishing property Starch property White-core kernel
2009/7/21
The kernels of Hattan-nishiki No. 1 and Kairyo-omachi have larger air spaces in the white-core tissue and are broken easily during the process of polishing when compared with those of Senbon-nishiki a...