搜索结果: 1-8 共查到“aw”相关记录8条 . 查询时间(0.094 秒)
Bronisław Malinowski（图）
Bronisł aw Malinowski Ideas and Achievements University positions Bibliography Sources and further reading See also
2013/5/13
Bronisław Malinowski,From Wikipedia, the free encyclopedia.(Redirected from Bronislaw Malinowski).For the Olympic champion athlete see Bronisław Malinowski (athlete).Bronisław Kasper Ma...
Influence of Inoculation on Properties of Aluminium EN AW-Al99,5
Mechanical properties Aluminium Titanium Boron Electromagnetic field
2011/3/11
The main aim of studies was to determine common influences of two different structure refinement methods on EN AW-Al99,5 electrical conductivity and deformability. The first method is internal factor ...
搜救奇兵：AW-101“灰背隼”直升机（图）
搜救 奇兵 AW-101 灰背隼直升机
2010/12/28
以色列《最新防务》杂志2010年9月13日报道，美国空军计划用一种成熟的先进平台替换目前装备的HH-60G“铺路鹰”战斗搜救直升机，奥古斯塔-韦斯特兰（以下简称“奥-韦”）公司将提供以AW-101“灰背隼”直升机为基础研发的HH-71型直升机作为竞标机型。
Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles
Aluminum alloy Composite materials Powder metallurgy Corrosion resistance Polarisation curve Abrasive wear
2010/8/17
Considerable attention is focused on metal matrix reinforced with strength and high modulus ceramic reinforcements because of their superior properties in comparison with most of conventional material...
On the friction stir welding of aluminium alloys EN AW 2024-0 and EN AW 5754-H22
Friction stir welding EN AW 2024-0 EN AW 5754-H22 Dissimilar material welding
2009/12/1
Purpose: Purpose of this paper is investigate the friction stir welding capability of the EN AW 2024-0 and EN
AW 5754-H22 Al alloys are studied, because two aluminium alloys are widely used in the in...
AW-600弧焊机器人
弧焊机器人 搬运 工业机器人 水切割
2008/11/24
AW-600弧焊机器人是示教再现型工业机器人，它适用于弧焊、水切割、等离子切割、涂密封胶、搬运、装配等多种作业。AW-600弧焊机器人技术参数：结构形式：多关节式。轴数：6轴、外部2轴。示教方式：示教盒示教。再现方式：CP(直线、圆弧)、PTP。 驱动方式：交流伺服驱动。各轴运动范围(最大速度)：T(1)-150°-+150°(100°/sec)；W(2)-90°-+135°(100°/sec)；...
AW-250TG高空作业车控制系统开发研究
高空作业车 控制系统
2008/11/17
该项目针对AW-250TG高空作业车控制系统进行了研究开发，采用模糊控制策略，通过高级电液比例控制和故障诊断及安全联锁，实现了高空车行走、变幅、俯仰、转向动作的平衡可靠。项目经用户实际应用，系统运行稳定可靠，经济效益显著，可完全代替日产AW-250TG高空作业车的控制系统，具有较大的推广应用价值。该项目居国内领先水平。