搜索结果: 1-3 共查到“林业工程 wear”相关记录3条 . 查询时间(0.054 秒)
Cutting Performance and Wear Characteristics of Chromium Nitride Coated Tools II.The chip forming ability of worn tools in edge-grain milling of spruce
CrN coated tool chip formation tool wear up-milling
2010/3/4
To establish the cutting performance and tool wear characteristics of a cemented carbide tool with clearance faces coated with CrN (UP), edge grain surfaces of spruce were milled with a 134 mm diamete...
Effect of Electrical Potentials on Tool Wear and Measurement of Electrostatic Voltage in Machining of Air-dried Douglas-fir
wood cutting tool wear corrosive wear electrical suppression static electricity
2009/3/6
To clarify the effect of electrical potentials on the tool-wear progression of high-speed steel tools in the machining of air-dried Douglas-fir (Pseudotsuga menziesii FRANCO), tool-life tests of plane...
Influence of saw blade clearance over the workpiece on tool-wear
circular saw tool-wear clearance saw blade
2009/2/25
This paper presents the results of experimental measurement of tool-wear in the cutting process with circular saw of oak wood depending on the upper clearance of 5mmand 50 mm, respectively. The circ...