搜索结果: 1-15 共查到“材料科学 resistance”相关记录53条 . 查询时间(0.144 秒)
Effect of heat treatment on the microstructure, hardness and abrasive wear resistance of high chromium hardfacing
destabilized austenite carbide dry rubber wheel test factorial regression GMAW toughness
2014/2/24
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear
resistance of high chromium hardfacing was investigated. The results from the study...
Resistance to time-dependent deformation of polystyrene/carbon nanotube composites under cyclic tension
Polymer–matrix composites Creep Electron microscopy Extrusion
2015/3/30
Materials subject to cyclic stress can succumb to fatigue, causing failure at stress levels much lower than those in static loading cases. Herein we discussed the viscoelastic behaviors of polystyrene...
Effect of deformation-induced martensite on the microstructure, mechanical properties and corrosion resistance of X5CrNi18-8 stainless steel
Austenitic stainless steel Plastic deformation Mechanical properties Weight loss method H2SO4 solution
2010/8/17
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
The application of statistical models in wear resistance simulations of Al-Al2O3 composites
Composites Infiltration Simulation Statistical models
2010/8/17
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
Weldability of 440 MPa galvanized steel with inverter DC resistance spot welding process
Resistance spot welding SPRC440 SGARC440 Inverter DC spot welding system Lobe diagram
2010/8/17
Resistance spot welding is a process that uses resistance Joule heat which occurs when a high current is applied with contact resistance that exists between metals and their specific resistance. This ...
Influence of cold rolling on the corrosion resistance of austenitic steel
cold rolling corrosion resistance austenitic steel
2010/8/12
The existing demand for materials with high functional properties, a definite geometrical shape, a high resistance to the destructive effect of a aggressive environments, produced in
compliances with...
Purpose: The purpose of this paper was to present the results of a special abrasion test of poly(vinyl chloride) and polypropylene filled with calcium carbonate pipes. Abrasion test’s results for pipe...
Corrosion resistance of high-manganese austenitic steels
Corrosion resistance High-manganese steels TWIP-effect Immersion test General corrosion Corrosion pits
2010/8/17
High-manganese austenitic steels belong to the second generation of modern high strength steels for automotive industry [1]. Their mean advantage over first generation steels with a matrix based on A2...
Diode laser surface modification of Ti6Al4V alloy to improve erosion wear resistance
Laser Surface Alloying LSA Laser Gas Nitriding
2009/12/2
Purpose: Purpose of this paper : The purpose of the study was to develop new laser alloying technology
providing high erosion wear resistance of the working surfaces of blades made of titanium alloy ...
The structure and properties of steel with different pearlite morphology and its resistance to abrasive wear
Abrasive wear Block sections Switch Pearlite morphology Isothermal annealing
2009/12/2
Purpose: The analyse of pearlite morphology changes as a result of hot rolling process and isothermal annealing.
Design/methodology/approach: Physical modelling of isothermal annealing for a transiti...
Erosion and abrasion wear resistance of GMA wire surfaced nanostructural deposits
Welding GMA surfacing Nanostructure
2009/12/2
Purpose: Purpose of this study was to find influence of chemical composition, structure and hardness of modern
metal cored wire deposits on their hardness and erosion and abrasion wear resistance of ...
Corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9 – PE type in acid environment
Composites Corrosion resistance
2009/12/2
Purpose: The purpose of the paper is to present corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9
– PEHD type in acid environment.
Design/methodology/approach: Composite materials Fe7...
Corrosion resistance of metallic implants used in bone surgery
Biomaterials Pitting corrosion Biocompatibility
2009/12/2
Purpose: The purpose of the research was analysis of influence of mechanical damages on the implants’ surface
made of Cr-Ni-Mo steel on the pitting corrosion resistance. Analysis was performed for im...
Crevice corrosion resistance of NiTi alloy after various surface treatments
Metallic material Biomaterials Corrosion
2009/12/2
Purpose: The aim of the work was determination of crevice corrosion resistance of NiTi alloy after various
surface treatments.
Design/methodology/approach: The evaluation of the electrochemical beha...
Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques
Corrosion PVD CVD Ceramic tools materials
2009/12/1
Purpose: The aim of the research was the investigation of the corrosion resistance and structure of the TiN,
TiN+multiTiAlSiN+TiN, TiN+TiAlSiN+TiN, TiN+TiAlSiN+AlSiTiN coatings deposited by PVD proce...