搜索结果: 1-14 共查到“材料科学基础学科 Composites”相关记录14条 . 查询时间(0.078 秒)
中国地质大学科学技术发展院赵思佳(硕士研究生)，周克清*等，工程学院 Available online 25 April 2019，Composites Part A:Applied Science and Manufacturing, In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy
层状；二硫化钼；二维纳米；结构；优异
2021/10/20
近日，国际著名学术期刊《Composites Part A: Applied Science and Manufacturing》在线刊发了中国地质大学工程学院周克清副教授团队的研究成果——“In situ fabrication of molybdenum disulfide based nanohybrids for reducing fire hazards of epoxy”。该文第一作者...
Ageing process influence on mechanical properties of polyamide - glass composites applied in dentistry
Ageing process mechanical properties polyamide glass composites dentistry
2010/8/11
Man did replacements for broken or sick units of the human body were in imagination of a man from the past. This has given birth to a new branch of science, called 'biomaterial science'. This branch o...
The application of transient thermography for the thermal characterisation of carbon fibre/epoxy composites
Non-destructive testing Transient thermography Thermal diffusivity
2009/12/14
Purpose: Primary purpose of the present experimental study was to evaluate the local fibre content in carbon fibre/epoxy composites using transient thermography.
Design/methodology/approach: The expe...
Mechanical and structural properties of polypropylene composites filled with graphite flakes
Polymer Filler Crystallization
2009/12/3
Purpose: The goal of the work is to study the polymer matrix composite (PMC) with isostactic Polypropylene (iPP) as a matrix material and graphite as a filler.
Design/methodology/approach: Density an...
Mechanical and tribological properties of TiC–based composites for ED machining
Composites Mechanical properties Wear resistance
2009/12/2
Purpose: The goal of this work is comparative study of TiC–(Mo, Ni) composites with different TiC-phase content to obtain material with an optimal mechanical and tribological properties, which can be ...
Fabrication and characterization of TiAl/Ti3Al-based intermetallic composites (IMCs) reinforced with ceramic particles
Composites TiAl
2010/8/16
TiAl/Ti3Al-based alloys have several advantages over conventional titanium alloys, such as higher elastic modulus, lower density, better mechanical properties at elevated temperatures, and higher oxid...
Neural network application in simulations of composites Al-Al2O3 tribological properties
Computational materials science Composites Infiltration
2009/12/2
Purpose: The purpose of this paper is application of neural networks in tribological properties simulation of
composite materials based on porous ceramic preforms infiltrated by liquid aluminium allo...
Wear performance of aluminium/Al2O3/C hybrid composites
Composites Graphite Wear resistance
2009/12/2
Purpose: The effects of the applied load and graphite volume fraction on dry-sliding friction and wear properties
of hybrid composite reinforced with alumina fibres and graphite in form of fibres or ...
Surface modification of PBO fiber by electrostatic discharge for composites
Composites Surface treatment Surface free energy
2009/12/1
Purpose: PBO fibers provide great potential applications as reinforcement fibers for advanced composites due
to the excellent thermal resistance and specific stiffness and strength. However, the inte...
Tribological properties of hybrid composites containing two carbide phases
Composites Wear resistance Image analysis Casting
2009/12/1
Purpose: The article presents the research results on tribological properties (friction coefficient, wear) of the
frictional couple cast iron-composite. The subject of that research was aluminium hyb...
Cast in situ composites of Ni3Al / MeC type
Composite in situ Intermetallic phase SHSB Process Exothermic reaction Carbides of TiC WC ZrC NbC TaC
2011/3/30
In this work a new method SHSB (Self- Propagating High-Temperature Synthesis in Bath) has been used to produce of five new composites i.e.Ni3Al / TiC, Ni3Al / WC, Ni3Al / Zr, Ni3Al / NbC and Ni3Al /Ta...
Cast in situ composites of Ni3Al / MeC type
Composite in situ Intermetallic phase SHSB Process Exothermic reaction Carbides of TiC WC ZrC NbC TaC
2011/3/30
In this work a new method SHSB (Self- Propagating High-Temperature Synthesis in Bath) has been used to produce of five new composites i.e.Ni3Al / TiC, Ni3Al / WC, Ni3Al / Zr, Ni3Al / NbC and Ni3Al /Ta...
Tensile mechanical properties in PP/SEBS/Microballon composites under impact loadings
Properties Mechanical properties Strain rate
2010/1/19
Purpose: The mechanical properties of the syntactic polymer foams at the intermediate and high strain rates
were not understood comprehensively. Then, this study characterizes the tensile mechanical ...
The structure and properties of hybrid preforms for composites
Composites Ceramic preform Alumina Strength
2010/2/22
Purpose: Article describes production technology of hybrid preform for reinforcing of composite materials.Some important properties such as shear strength and permeability were investigated in order t...