搜索结果: 1-10 共查到“无机非金属材料 Influence”相关记录10条 . 查询时间(0.093 秒)
Behaviour of nitrided layers subjected to influence of hydrogen
Corrosion Plasma nitriding Hydrogen permeation and uptake Hydrogen embrittlement
2010/8/17
High-strength steels may exhibit severe loss of ductility, toughness and strength due to hydrogen embrittlement (HE), resulting in sudden fracture or delayed failure. The susceptibility of steels to H...
The influence of the sintering conditions on the properties of the stainless steel reinforced with TiB2 ceramics
AISI 316L stainless steel TiB2 ceramics Sintering
2010/1/11
The paper analyzes the influence of the temperature and pressure on the properties and structure of the austenitic AISI 316L stainless steel reinforced with 1% vol.TiB2 ceramics.
The influence of electrical current on Al-Si alloys crystallization
Microwave drying Core sands Oil binder Microwaves Characteristics of molding sands
2011/3/15
This works presents the results of studies concerning possibility of application of microwave heating in the curing process of molding sands containing oil binders. Molding sands prepared with three k...
Influence of hard ceramic particles on structure and properties of TGM
Cemented carbides Tool Gradient Materials Powder Metallurgy
2010/2/9
Purpose: The Powder Metallurgy route has been chosen to fabricate tool gradient materials with high disproportion of cobalt matrix portion between core and surface layer. In the paper structure and pr...
Influence Cr on Crystallization and the Phase Transformations of the Bronze BA1044
Innovative materials and casting technologies Aluminium bronze
2011/3/11
The investigations were introduced in the paper, method of thermal and derivative analysis (TDA), the process of crystallization and phase transformation in the solid state of the aluminium bronze CuA...
Influence of Conditions of Preparing the Foamed Plaster on its Degree of Foaming
Innovative foundry technologies and materials Precision casting Foamed plaster process
2011/3/11
Foamed plaster moulds are used in precision casting process of non-ferrous alloys. Casting from those moulds are characterizedby high dimensional accuracy, very good shape pattering and small surface ...
The influence of the Ni layer covering carbon fibre on the AK132 matrix structure
composites carbon fibre metal cover simulation of solidifying
2011/3/11
The quality and the quantity assessment of the structure of the AlSi13Cu2 alloy matrix composites reinforced with carbon fibre in the amount of 5, 10, or 15 vol. percent has been presented.
The influence of organic fibre types on technological parameters in process of ceramic moulds making
Innovative casting materials and technologies Investment moulding method
2011/3/11
The research being presented in this article has been set up with the aim of working out both the technology and starting up manufacturing process ( in which a new generation of ceramic slips is emplo...
The influence of graphite particles on supercooling of composite suspension
cast composites graphite suspension solidification
2011/3/11
The work presents the solidification kinetics of a composite suspension with graphite particles dispersed in AlMg10 alloy matrix during its flow along a runner. The temperature field for investigated ...
The influence of graphite particles on solidification of composite suspension during flow
casting composites suspension flow solidification of composites
2011/3/11
The measurements concerning the temperature field of the composite suspension with AlMg10 alloy matrix reinforced with graphite particles during its flow in a runner-like mould cavity have been perfor...