搜索结果: 1-12 共查到“机械工程 Influence”相关记录12条 . 查询时间(0.072 秒)
Polysialates binders preparation and their influence to shear strength of foundry sand mixtures
Product development Innovative foundry technologies and materials
2011/3/15
This paper deals with polysialates water-glasses preparation. There were used various procedures with the goal to create inorganic polymer on silicon and aluminum base. The one composed of SiO2 and Al...
Clearance Influence on Dynamic Response of Intermittent Roller Chain Drive
roller chain clearance intermittent motion motion law
2011/8/3
The clearances appear in chain link hinges induced by manufacturing tolerance or wear of components are the most important factor that influences the dynamic performance of the intermittent roller cha...
Inlet Recirculation Influence to the Flow Structure of Centrifugal Impeller
centrifugal compressor inlet recirculation flow field calculation
2011/8/3
Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension, and is successively used in some engineering applications. Unfortunately its working mechanism is s...
Influence of heat treatment on micro-structure of slurry aluminide coatings type TiAlSi obtained on TiAlCrNb alloy
Thin and thick coatings Aluminides Microstructural stability
2009/12/14
Purpose: Influence of heat treatment on microstructural changes in slurry TiAlSi coating deposited with 12.5% Si concentration on Ti48Al2Cr2Nb intermetallic alloy and investigation of the influence of...
Influence of the method of heating/cooling moulds on the properties of injection moulding parts
Engineering polymers Working properties of materials and products Crystallinity
2009/12/2
Purpose: The main purpose of carry out research was estimate the influence thermal conditions of the mould on
properties of injection moulded parts.
Design/methodology/approach: The properties of st...
The influence of welding parameters on weld characteristics in electric arc stud welding
stud welding parameters weld geometry penetration depth
2009/10/23
In this paper the influence of welding parameters on weld geometry during stud welding (Drawn Arc Welding process with ceramic ferrule) on steel plate and pipe is analyzed as a variation of weld penet...
Influence of organisational culture on company performance
Organisational performance Values survey module Model of culture fit
2010/1/20
Purpose: The lack of organizational effort to assess cultural compatibility or fit prior to the engagement of
firms has contributed to the failure of several mergers and acquisition. A Korean public ...
Influence of temperature and microstructure of the workpiece material on energy quanta in cutting process
Cutting force Energy quanta power spectra Microstructure
2010/2/4
Purpose: of this paper is on-line identification of the machinability based on the theory of energy quanta power spectra of the measured signal of the cutting force. Identification method is supported...
An analysis of the influence of decompression cavity on the cold hobbing processes
Finite element method Decompression cavity Cold hobbing Die manufacturing
2010/2/8
Purpose: This study aims to investigate the influence of decompression cavity on the cold hobbing processes.Design/methodology/approach: In the current study, the rigid-plastic finite element method w...
Mechanism of silicon influence on the chill of cast iron
Cast iron Structure Chilling tendency Chill
2011/3/11
In this work an analytical solution of general validity is used to explain mechanism of the silicon influence on the absolute chill tendency (CT) and chill (w) of cast iron. It is found that CT can be...
Analysis of influence of chemical composition of Al-Si-Cu casting alloy on formation of casting defects
Al-Si-Cu alloy Neural networks Casting defects Casting quality
2010/2/22
Purpose: A methodology of the computer-aided determining relationship between chemical composition of aluminum alloy and castings quality was presented in the paper.
Design/methodology/approach: To r...
The Influence of Saturation of Cast Iron Austenite with Carbon on the Ausferrite Transformation
austenitizing austempered austenite hardness impact strength
2011/3/11
Austenitizing during quench hardening of the ductile cast iron influences the content of carbon in austenite depending on the soaking heat. On the other hand, the saturation of austenite impacts its t...