搜索结果: 1-9 共查到“动力与电气工程 process”相关记录9条 . 查询时间(0.146 秒)
第20届节能减排过程集成、建模与优化会议（20th Conference on Process Intergration, Modelling and Optimisation for Energy Saving and Pollution Reduction）
第20届 节能减排过程 集成 建模 优化 会议
2017/2/16
PRES'17 is the 20th in the series. It was initiated by the late Professor Zdenĕk Burianec in the framework of CHISA congresses.
Study shows tectonic plates not rigid, deform horizontally in cooling process（图）
cooling process rigid
2014/12/1
The puzzle pieces of tectonic plates that make up the outer layer of the earth are not rigid and don't fit together as nicely as we were taught in high school.
Statistical analysis of the blast furnace process output parameter using arima control chart with proposed methodology of control limits setting
ARIMA control chart blast furnace process environmental aspects
2009/10/23
The paper deals with the statistical analysis of the selected parameter of the blast furnace process. It was proved that analyzed measurements have been autocorrelated. ARIMA control chart was selecte...
INVESTIGATION INTO THE EFFECT OF DIFFERENT FUELS ON IGNITION DELAY OF M-TYPE DIESEL COMBUSTION PROCESS
ignition delay case study M-type
2009/10/14
An ignition delay is a very complex process which depends on a great number of parameters. In practice, definition of the ignition delay is based on the use of correlation expressions. However, the co...
INVESTIGATIONS OF COMBUSTION PROCESS IN COMBINED COOKER-BOILER FIRED ON SOLID FUELS
solid fuels combustion cooker-boiler
2009/10/13
The aim of the investigation was to make some reconstructions on the existing stove used for cooking and baking and to obtain the combined cooker-boiler which will fulfill the demands of European stan...
EGR对电喷LPG发动机燃烧过程及NOx排放的影响（Effects of EGR on Burning Process and NOx Emission of Electronic Controlled LPG Injection SI Engine）
废气再循环 电喷LPG发动机 快速燃烧过程 双火花塞
2009/9/2
研究了EGR率的变化对LPG燃气在稀燃条件下的燃烧、排放以及循环变动率的影响。结果表明，基于高能双火花塞点火的快速燃烧系统可以加快LPG燃气的燃烧速率，有效地改善引入EGR的LPG发动机的快速燃烧过程。在整个有效废气再循环率（REGR）范围内LPG稀燃稀限得到较大幅度提高，同时抑制了发动机因高温而生成的NOx。同时，采用快速燃烧系统的最大REGR为8.11%，大于普通方式的5%；LPG燃烧过程的循...
中国矿业大学工程热力学课件Chapter 5 Ideal-Gas Process。
柴油机缸内工作过程的数值模拟（Numerical Simulation of Working Process in the Cylinder of Diesel Engine）
柴油机 工作过程 多维
2009/5/22
利用CFD软件AVL_Fire对YD490ZL型柴油机进气、压缩、燃烧过程进行了多维瞬态数值模拟。通过对柴油机工作过程中不同时刻气体流动、壁面传热、燃油喷雾雾化、颗粒形成等因素的分析，结果认为适当调整燃烧室中心相对气缸中心在X方向的距离，可以使燃烧更加充分、提高柴油机的燃油经济性；燃烧室换热系数不仅随空间位置变化，而且还随时间变化而各不相同，通过这种多维瞬态计算能够提供不同时刻、不同位置的换热系数...
Tendencies to the Improvement of the Cupola Process
Innovative Foundry Technologies and Materials Cast Iron Cupola
2011/3/11
Despite the fact of the big development of the technology of melting cast iron in electrical furnaces an essential part of it is still obtained in cupolas. In the paper actual tendencies of the improv...