搜索结果: 1-15 共查到“电子科学与技术 Influence”相关记录26条 . 查询时间(0.103 秒)
INCIDENCE ANGLE INFLUENCE ON THE QUALITY OF TERRESTRIAL LASER SCANNING POINTS
aser scanning incidence angle individual point quality measurement setup
2016/2/29
A terrestrial laser scanner measures the distance to an object with a precision in the order of millimeters. The quality of each single
point in a point cloud affects post-processing applications, su...
New ESD standard and influence on test equipment requirements
New ESD standard test equipment requirements
2010/1/11
The IEC61000-4 series of standards form a basic framework for the immunity and emissions testing of electrical and electronic equipment. They are the basis for EN standards used to test CE compliance ...
THE INFLUENCE OF NON-HOMOGENOUS DIELECTRIC MATERIAL IN THE WAVEGUIDE PROPAGATION MODES
Electromagnetic surface waves waveguide Dielectric waveguides Rectangular waveguides
2010/1/12
The aim of this paper is to indicate the equations of electromagnetic wave in homogenous and non-homogenous dielectric material, estabilising the bundary conditions and solves by FEM the equations of ...
ON THE SNUBBER INFLUENCE TO THE SWITCHING AND CONDUCTION LOSSES IN A CONVERTER USING SWITCHED CAPACITOR
Switched capacitor converter Bidirectional switches with IGBT dynamically varying resistance models
2010/1/12
The paper deals to design and to compute the snubber parameters influence on
the switching and conduction losses of the transistors (IGBT) used as bidirectional
switches in a converter with switched...
Influence of Asymmetric Pulses in Spread Spectrum Systems
Asymmetric pulses Spread spectrum systems M-sequences Autocorrelation function
2010/12/8
This paper examines the impact of asymmetric pulses in NRZ waveforms generated by maximum-length sequences and used in spread spectrum systems. The data asymmetry phenomenon is produced by differentia...
The Influence of Load Pressure on Properties of Wafer-Bonding Interface
Wafer bonding load pressure the optical and electrical quality interface
2010/7/15
Wafer bonding offers a new degree of freedom to integrate mismatched materials while maintaining high optical and electrical quality interfaces. The electrical and optical characteristics of the wafer...
A New Method for the Preparation of Fine-Grained SnO2 and WO3 Powders: Influence of the Crystallite Size on the Electrochemical Insertion of Li+ in SnO2 and WO3 Electrodes
Fine-Grained SnO2 and WO3 Powders the Electrochemical Li+ SnO2 and WO3 Electrodes
2010/12/14
We propose an unconventional method to obtain fine-grained SnO2 and WO3 powders. It uses as precursors, polymer complexes between polyethylene oxide (POE) and SnCl4 or WCl6 respectively. By pyrolysis ...
Influence of the pH Values of the Sol–Gel State on the Properties of SnO2 Powders Obtained From a Sol–Gel Route
the pH Values the Sol–Gel State SnO2 Powders a Sol–Gel Route
2010/12/14
The evolution of the specific surface area and crystallite size of SnO2 powders, prepared from a sol-gel process, was studied as a function of the calcination temperature of the stannic hydroxyde coll...
Influence of Intrinsic Trapping on The Performance Characteristics of ZnO-Bi2O3 Based Varistors
Intrinsic Trapping ZnO-Bi2O3 Based Varistors
2010/12/15
The lumped parameter/complex plane analysis technique reveals several contributions to the ac small-signal terminal immittance of the ZnO-Bi2O3 based varistors' grain-boundary response. The terminal c...
Influence of Multiple Trapping Phenomena on The Applications Criteria of ZnO-Bi2O3-Based Varistors
Multiple Trapping Phenomena Applications Criteria ZnO-Bi2O3-Based Varistors
2010/12/15
The performance characteristics of the ZnO-Bi2O3-based varistors can be assessed to meet the applications criteria on the basis of a systematic evaluation corresponding to various experimental conditi...
Influence of Time-Dependent Power Dissipations on the Ageing Behavior of Thick-Film Resistors
Time-Dependent Power Dissipations Thick-Film Resistors
2010/12/15
Reliability experiments on hybrid circuits are usually carried out by accelerated ageing test. The circuits or the components under test are stored at an elevated ambient temperature and the change of...
Influence of Thermal Treatment Under Various Oxygen Pressures on The Electronic Properties of Ceramics and Single Crystals of Pure and Tin-Doped Indium Oxide
Thermal Treatment Oxygen Pressures Tin-Doped Indium Oxide
2010/12/16
The different electronic behaviors of pure and tin-doped indium oxides with various thermal treatments under high and low oxygen pressure are discussed on the basis of the evolution of the band energy...
Influence of Thermal Treatment on The Electronic Properties of ITO Thin Films Obtained by RF Cathodic Pulverization. Study of Solar Cells Based on Silicon/(RF Sputtered) ITO Junctions
ITO Thin Films RF Cathodic Pulverization Solar Cells Silicon/(RF Sputtered) ITO Junctions
2010/12/16
ITO (Indium Tin Oxide) thin films obtained by R.F cathodic sputtering have been studied. The influence of thermal treatment on the electronic properties of the films has been particularly investigated...
About the Influence of SiO2 on the Temperature Behaviour of Ruthenate Based Thick Film Resistors
SiO2 the Temperature Behaviour of Ruthenate Thick Film Resistors
2010/12/21
Substituting glass by SiO2 in thick film resistors results in a small increase of R□, a decrease of dR□/dT and an increase of d2R□/dT2 (at room temperature). From these experimental results it follows...
The Influence of Lubrication on Electrical and Mechanical Parameters of Potentiometer Resistive Element
Lubrication Electrical and Mechanical Parameters Potentiometer Resistive Element
2010/12/23
The present paper deals with trials to eliminate this disadvantage of thin film potentiometers by protection against moisture.The protective coating should, because of its affinity to the resistive fi...