搜索结果: 1-9 共查到“口腔医学 gold”相关记录9条 . 查询时间(0.12 秒)
Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
Indirect composite Primer Silver-palladium-copper-gold alloy
2010/11/26
The purpose of this study was to evaluate the effect of primers on bonding between a silver-palladium-copper-gold alloy and an indirect composite material. Cast disks were air-abraded with alumina, co...
Effect of Metal Priming Agents on Bond Strength of Resin-modified Glass Ionomers Joined to Gold Alloy
Bonding Priming agent Resin-modified glass ionomer cement
2009/9/14
The aim of this study was to evaluate in vitro the shear bond strength to a gold alloy of RMGICs combined with three metal priming agents. Gold alloy was primed with one of the following materials: Al...
Effect of a Metal Priming Agent on Wear Resistance of Gold Alloy-indirect Composite Joint
Indirect composite Primer Wear
2009/9/14
The purpose of the current study was to evaluate the effect of a metal priming agent on wear resistance of gold alloy-composite joint. Four types of plate specimen were prepared: composite (Estenia C&...
Cross-sectional TEM Analysis of Porcelain Fused to Gold-coated Titanium
TEM Titanium-porcelain interface Gold coating
2009/9/14
This study investigated the interfacial microstructure between gold-coated titanium and low-fusing porcelain. The square surfaces of cast titanium split rods were sputter-coated with gold using a sput...
Water Durability of Resin Bond to Pure Gold Treated with Various Adhesion Promoting Thiirane Monomers
Thiirane monomer Tensile bond strength Gold
2009/9/14
Adhesion promoting monomers for precious metals, 2,3-epithiopropyl methacrylate (EP1MA), 4,5-epithiopentyl methacrylate (EP3MA), 9,10-epithiodecyl methacrylate (EP8MA), 10,11-epithioundecyl methacryla...
Effect of pH and Addition of Salt on the Adsorption Behavior of Lysozyme on Gold, Silica, and Titania Surfaces Observed by Quartz Crystal Microbalance with Dissipation Monitoring
Lysozyme Adsorption QCM-D
2009/9/11
The adsorption behaviors of lysozyme on dentally related Au, SiO2, and TiO2 surfaces were investigated by a quartz crystal microbalance with dissipation monitoring (QCM-D) method. Frequency shifts ind...
Comparative Evaluation of Thione and Phosphate Monomers on Bonding Gold Alloy and Ti-6Al-7Nb Alloy with Tri-n-butylborane initiated Resin
Phosphate Thione Ti-6Al-7Nb alloy
2009/9/11
This study aimed to evaluate the bonding behaviors of a gold alloy and a titanium-aluminum-niobium (Ti-6Al-7Nb) alloy after priming with three metal conditioners. Cast alloy disks were ground and divi...
Effect of bending on the mechanical properties of gold wrought-wire clasps: a non-linear finite element analysis
Wire clasp Finite element analysis Residual stress
2009/9/11
The purpose of this study was to assess the effect of bending of dental gold alloy wires on the mechanical characteristics of wrought-wire clasps. We conducted a simulation of large deformation in str...
Adlloy surface treatment of noble alloys has been shown to increase the bond strength of composite to gold alloys. The purpose of this study was to test the bond strength of Adlloy-treated type IV g...